0

Out of 0 Ratings

Owner's of the Garmin Marine GPS System GPSMAP gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 132
 
GPSMAP
®
6000/7000 Series Owner’s Manual 89
Radar
3. Complete an action:
Select Menu > Noise Rejection > Sea Clutter for Cruising, Harbor, Offshore, or Sentry
mode.
Congure the setting for the short-range screen in Dual Range mode. Select > Menu >
Noise Rejection > Sea Clutter for the GPSMAP 6000 series. Select Left > Noise Rejection
> Sea Clutter for the GPSMAP 7000 series.
Congure the setting for the long-range screen in Dual Range mode. Select > Menu >
Noise Rejection > Sea Clutter for the GPSMAP 6000 series. Select Right > Noise Rejection
> Sea Clutter for the GPSMAP 7000 series.
4. Select a setting that reects present sea conditions:
Rough, Medium, or Calm.
5. Select
Up or Down to decrease or increase the appearance of sea clutter until other targets are
clearly visible on the Radar screen.
Clutter caused by sea conditions may still be visible.
Restoring the Default FTC Setting
NOTE: Depending upon the radar in use, the FTC setting congured for use in one radar mode may
or may not be applied to other radar modes or to the Radar Overlay (page 85).
1. From the Home screen, select
Radar.
2. Select
Cruising, Harbor, Offshore, Dual Range or Sentry mode.
3. Complete an action:
Select Menu > Noise Rejection > FTC > Off for Cruising, Harbor, Offshore, or Sentry mode.
Congure the setting for both screens in Dual Range mode. Select > Menu > Noise
Rejection > FTC > Off for the GPSMAP 6000 series. Select Left > Noise Rejection > FTC
> Off for the GPSMAP 7000 series.
Restoring the Default Rain Clutter Setting
NOTE: Depending upon the radar in use, the rain clutter setting congured for use in one radar
mode may or may not be applied to other radar modes or to the Radar Overlay (page 85).
1. From the Home screen, select
Radar.
2. Select
Cruising, Harbor, Offshore, Dual Range or Sentry mode.
3. Complete an action:
Select Menu > Noise Rejection > Rain Clutter > Off for Cruising, Harbor, Offshore, or
Sentry mode.
Congure the setting for the short-range screen in Dual Range mode. Select > Menu
> Noise Rejection > Rain Clutter > Off for the GPSMAP 6000 series. Select Left > Noise
Rejection > Rain Clutter > Off for the GPSMAP 7000 series.
Congure the setting for the long-range screen in Dual Range mode. Select > Menu >
Noise Rejection > Rain Clutter > Off for the GPSMAP 6000 series. Select Right > Noise
Rejection > Rain Clutter > Off for the GPSMAP 7000 series.