0

Out of 0 Ratings

Owner's of the Garmin Marine GPS System GPSMAP gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 132
 
106 GPSMAP
®
6000/7000 Series Owner’s Manual
Sonar
Setting the Fish Alarm
You can set an alarm to sound when the chartplotter detects a suspended target of the specied
symbols.
1. From the Home screen, select
Congure > Alarms > Sonar > Fish.
2. Complete an action:
Select to sound an alarm for all sh sizes.
Select to sound an alarm for medium and large sh only.
Select to sound an alarm for large sh only.
Transducer Conguration
Setting the Keel Offset
The keel offset compensates for the surface reading for the depth of a keel, making it possible to
measure depth from the bottom of the keel instead of from the transducer location. Enter a positive
number to offset for a keel. You can enter a negative number to compensate for a large vessel that
may draw several feet of water.
1. Complete an action, based on the location of the transducer:
If the transducer is installed at the water line, measure the distance from the transducer
location to the keel of the boat. Enter this value in step 3 as a positive number.
If the transducer is installed at the bottom of the keel, measure the distance from the
transducer to the water line. Enter this value in step 3 as a negative number.
Transducer at the water line
Transducer at the bottom of
the keel
Keel Offset
A (+) positive number
shows depth at the bottom
of the keel.
A (-) negative number
shows depth at the surface.
2. From the Home screen, select Congure > My Boat > Keel Offset.
3. Complete an action:
For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the distance
measured in step 1. Ensure that you enter a positive or a negative number based on the
location of the transducer.
For the GPSMAP 7000 series, use the on-screen keyboard to enter the distance measured
in step 1. Ensure that you enter a positive or a negative number based on the location of the
transducer.
4. Select
Done.