Garmin Marine GPS System GPSMAP User Manual

0

Out of 0 Ratings

Owner's of the Garmin Marine GPS System GPSMAP gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 132
 
GPSMAP
®
6000/7000 Series Owner’s Manual 61
Device Conguration
9. If you selected Farthest or Nearest in step 8, review the placement of the Auto Guidance line.
Determine whether the line safely avoids known obstacles, and whether the turns enable efcient
travel.
Auto Guidance maintains a wide clearance from obstacles in open water, even if you set the
Shoreline Distance setting to Near or Nearest. As a result, the chartplotter may not reposition the
Auto Guidance line, unless the destination selected in step 3 requires navigation through a narrow
waterway.
10. Repeat steps 1–9 at least once more, using a different destination each time, until you are familiar
with the functionality of the Shoreline Distance setting.
Setting the Heading Reference
You can set the directional reference used in calculating heading information.
1. From the Home screen, select
Congure > Preferences > Units > Heading.
2. Complete an action:
Select Auto Mag Var (automatic magnetic variation) to set the magnetic declination for your
location automatically.
Select True to set true north as the heading reference.
Select Grid to set grid north as the heading reference (000º).
Select User Mag Var to set the magnetic variation value manually. For the GPSMAP 6000
series, use the Rocker or the Numeric Keypad to enter the magnetic variance. For the
GPSMAP 7000 series, use the on-screen keyboard. Select Done.
Coordinate Systems
Setting the Position Format or the Map Datum Coordinate Systems
You can set the position format in which a given location reading appears, and the coordinate system
on which the map is structured. The default coordinate system is WGS 84.
NOTE: Do not change the position format or the map datum coordinate system unless you are using
a map or chart that species a different position format.
1. From the Home screen, select
Congure > Preferences > Units.
2. Complete an action:
Select Position Format to set the position format in which a given location reading appears,
and select a position format.
Select Map Datum to set the coordinate system on which the map is structured, and select a
coordinate system.
Conguring the Time
1. From the Home screen, select Congure > Preferences > Units > Time.
2. Complete an action:
Select Time Format to set a time-keeping standard. Select 12 Hour, 24 Hour, or UTC
(universal time coordinate).
Select Time Zone > Auto to allow the chartplotter to set the time zone automatically.
•
•
•
•
•
•
•
•

   Find Your Products By Category