0

Out of 0 Ratings

Owner's of the Garmin Marine GPS System GPSMAP gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 132
 
18 GPSMAP
®
6000/7000 Series Owner’s Manual
Charts and 3D Chart Views
Deactivating a Target for an AIS Vessel
NOTE: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2
Vision data card.
1. From the Home screen, select
Charts.
2. Select
Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s Eye 3D.
3. Complete an action:
For the GPSMAP 6000 series, use the Rocker to select the AIS vessel.
For the GPSMAP 7000 series, touch the AIS vessel.
4. Select
AIS Vessel > Deactivate.
Setting the Safe-zone Collision Alarm
The safe-zone collision alarm is used only with AIS and MARPA. MARPA functionality works with
radar (page 77). The safe zone is used for collision avoidance, and can be customized. All safe-zone
collision alarm settings are applied to all charts, to all 3D chart views, to all radar modes, and to the
Radar Overlay.
1. From the Home screen, select
Congure > Other Vessels > Collision Alarm > On.
A message banner appears and an alarm sounds when a MARPA-tagged object or an AIS-
activated vessel enters the safe-zone ring around your boat. The object is also labeled as
dangerous on the screen. The Off setting disables the message banner and the audible alarm, but
the object is still labeled as dangerous on the screen.
2. Select
Range to set the measured radius of the safe-zone ring to a specied distance from 500 ft.
to 2.0 nm (or from 150 m to 3.0 km, or from 500 ft. to 2.0 mi.).
3. Select a distance.
4. Select
Time To to sound an alarm if AIS or MARPA determines that a target will intersect the
safe zone within the dened time interval (ranging from 1 to 24 minutes).
5. Select a time.
Viewing a List of AIS and MARPA Threats
NOTE: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2
Vision data card.
1. From the Home screen, select
Charts.
2. Select
Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s Eye 3D.
3. Select
Menu > Other Vessels > List > Show.
4. Select the type of threats to include in the list (All Threats
, MARPA threats only, or AIS threats
only).
Making a Call to an AIS Target
See “Making an Individual Routine Call to an AIS Target (page 113).