0

Out of 0 Ratings

Owner's of the Garmin Marine GPS System GPSMAP gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 132
 
GPSMAP
®
6000/7000 Series Owner’s Manual 41
Navigation
Clearing the Active Track
From the Home screen, select Information > User Data > Tracks > Clear Active Track.
The track memory is cleared, and the current track continues to be recorded.
Managing the Track Log Memory During Recording
1. From the Home screen, select Information > User Data > Tracks > Active Track Options >
Record Mode.
2. Complete an action:
Select Fill to record a track log until the track memory is full.
Select Wrap to continuously record a track log, replacing the oldest track data with new data.
Conguring the Recording Interval of the Track Log
You can indicate the frequency at which the track plot is recorded. Recording more-frequent plots is
more accurate but lls the track log faster.
1. From the Home screen, select
Information > User Data > Tracks > Active Track Options >
Interval > Interval.
2. Complete an action:
Select Distance to record the track based on a distance between points. Select Change to set
the distance. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad. For the
GPSMAP 7000 series, use the on-screen keyboard. Select Done.
Select Time to record the track based on a time interval. Select Change to set the time. For
the GPSMAP 6000 series, use the Rocker or the Numeric Keypad. For the GPSMAP 7000
series, use the on-screen keyboard. Select Done.
Select Resolution to record the track plot based on a variance from your course. This setting
is recommended for the most-efcient use of memory. Select Change to enter the maximum
error allowed from the true course before recording a track point. For the GPSMAP 6000
series, use the Rocker or the Numeric Keypad. For the GPSMAP 7000 series, use the on-
screen keyboard. Select Done.
3. Select
Done.
Copying Tracks
See “Chartplotter Data Management” (page 69).
Deleting All Saved Waypoints, Routes, and Tracks
From the Home screen, select Information > User Data > Clear User Data > All.
Navigating with a Garmin Autopilot
When you start any type of navigation (Go To, Route To, Guide To, or Follow Track), if you are
connected to a compatible Garmin autopilot (such as the GHP
10), you are prompted to engage the
autopilot.