0

Out of 0 Ratings

Owner's of the Garmin Marine GPS System GPSMAP gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 132
 
98 GPSMAP
®
6000/7000 Series Owner’s Manual
Radar
2. Complete an action:
Select Distance to set the distance to the end of the heading line. For the GPSMAP 6000
series, use the Rocker or the Numeric Keypad to enter the distance. For the GPSMAP 7000
series, use the on-screen keyboard.
Select Time to set the amount of time until you reach the end of the heading line. For the
GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the time. For the
GPSMAP 7000 series, use the on-screen keyboard.
3. Select
Done.
Showing and Conguring Spot Depth Soundings
On the Radar Overlay, you can turn on spot soundings and set a dangerous depth.
1. From the Home screen, select
Charts > Radar Overlay > Menu > Setup > Chart Setup > Spot
Depths > On.
2. Select
Spot Depths > Dangerous.
3. Enter the dangerous depth:
For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad.
For the GPSMAP 7000 series, use the on-screen keyboard.
4. Select
Done.
Showing and Conguring Navaid Symbols
You can show and congure the appearance of navaid symbols on the Radar Overlay.
1. From the Home screen, select
Charts > Radar Overlay > Menu > Setup > Chart Setup >
Symbols.
2. Complete an action:
Select Navaid Size to set the size of the navaid symbols shown on the map. Select a size.
Select Navaid Type > NOAA to show the NOAA navaid symbol set on the map.
Select Navaid Type > IALA to show the IALA navaid symbol set on the map.
Showing Additional Chart Details
You can show additional information on the Radar Overlay.
1. From the Home screen, select
Charts > Radar Overlay > Menu > Setup > Chart Setup >
Symbols.
2. Complete an action:
Select Land POIs > On to show land-based points of interest (POIs).
Select Light Sectors to show the sector in which a navigational light is visible. Select On to
lter out light sectors depending on the zoom level.
Select Chart Borders > On to show what area the maps cover when using a BlueChart g2
Vision data card.
Select Photo Points > On to show camera icons when using a BlueChart g2 Vision data card.
Setting the Front-of-boat Offset
See “Front-of-boat Offset” (page 95).