0

Out of 0 Ratings

Owner's of the Garmin Printer DTC300 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 278
 
RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
10-24
Selecting the Self Tests tab in the Diagnostics Utility
Use these options to run the internal Printer Self Tests.
Step Procedure
1
Select the appropriate Run button to execute either the Barcode Test Card,
the Standard Self Test or the Magnetic Self Test, as shown below. (Note:
These options apply to the DTC400, DTC300 and DTC300M Printers).
Click on the Barcode Test Card button to test the resin printing capabilities
of the Printer (Note: A full color ribbon (YMC) with a resin panel (K) or a
resin ribbon is required for this test.)
Click on the Standard Self Test button to determine Image Placement and
confirm that the Printer is working properly. (Note: The image consists of
fifteen (15) gray scale boxes. The gray boxes are composed from a
composite of YMC color panels.)
Click on the Magnetic Self Test button to test the Magnetic Encoding
capabilities of the Printer. (Note: Be sure to have magnetic stripe cards
installed in your Printer when running this test.)