0
Owner's of the Garmin All in One Printer STYLUS gave it a score of 0 out of 5. Here's how the scores stacked up:
Cleaning the Print Head
35
Cleaning the Print Head
If print quality has declined and the nozzle check indicates clogged nozzles, you
can clean the print head. Print head cleaning uses ink, so clean it only if necessary.
Note:
You cannot clean the print head if an ink cartridge is expended, and may not be able to
clean it when a cartridge is low. You must replace the cartridge first (see page 38).
1. Load letter-size plain paper in the sheet feeder.
2. Press the
Copy/Fax
button, then press
Menu
.
3. Press u or d to select
Maintenance
, then press
OK
.
4. Press u or d to select
Head Cleaning
, then
press the x
Color
button.
Cleaning lasts around 1 minute. When it’s
finished, you see a message on the display screen.
Caution:
Never turn off the printer during a cleaning cycle or you may damage it.
5. Press
1
to finish or
2
to run a nozzle check and confirm that the print head is
clean.
Note:
If you don’t see any improvement after cleaning the print head three times, turn off
your NX300/305 Series and wait at least six hours to let any dried ink soften. Then try
printing again. If quality does not improve, one of the ink cartridges may need to be
replaced. If that doesn’t help, contact Epson as described on page 44.
If you do not use your NX300/305 Series often, it is a good idea to print a few pages at
least once a month to maintain good print quality.
Find Your Products By Category
Please Login
