0

Out of 0 Ratings

Owner's of the PYLE Audio PDAs & Smartphones IKON RUGGED gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 406
 
Chapter 3: Get To Know The Ikôn
Inserting The microSD And SIM Card
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual 51
Tap on Start>Settings>System tab and then, tap on the Power icon to display the
Power dialog box.
Tap on the Built-in Devices tab, and tap in the checkbox next to Enable Bluetooth.
Next, tap on Start>Settings>Connections tab>Bluetooth icon.
Tap on the Mode tab, and check Turn on Bluetooth. Tap OK.
Turn your headset on and place it within a few feet of your Ikôn.
If needed, set your headset to visible so that the Ikôn can detect it and establish a
connection.
Most headsets are in pairing mode by default. If this is not the case, follow the headset man-
ufacturer’s instructions to place the headset in pairing mode.
Tap on Start>Settings>Connections tab>Bluetooth icon.
•In the Devices tab, tap Add new device. Wait for the Ikôn to scan for devices.
Choose the headset device from the list and tap on Next.
If the headset has authentication enabled, the Ikôn then prompts you to provide a passcode.
Type the passcode (or PIN – Personal Identification Number), and then tap on Next.
The Ikôn then displays a list of services. Choose the Hands Free service. (If you are attempt-
ing to pair another device, choose it from this list.)
•With Hands Free checked (enabled), tap Finish. The headset is now paired.
3.10 Inserting The microSD And SIM Card
There are two card holders available in the battery compartment of the Ikôn – the left-hand
holder is provided for a microSD (micro Secure Digital) and the right-hand holder is for a
SIM (Subscriber Identity Module) card.
The microSD cards provide additional non-volatile memory to your Ikôn. SIM cards
provide access to the voice option, the Internet, and so on.
3.10.1 Inserting The Cards
Switch off the Ikôn – press and hold down the Power button, and when the Shutdown
screen is displayed, choose Shutdown and tap on OK.
Remove the battery cover and the battery.
Pull the SD door down as the arrow icon on the door indicates.
Orient the microSD or SIM card according to the legend stamped into the plastic. the
SD and SIM doors have guides or rails into which you can slide the card