4.0
Owner's of the ProForm Hot Tub 831.21002 gave it a score of 4.0 out of 5. Here's how the scores stacked up:
13
The RESTORATION 2.0 is designed to provide you
with years of enjoyment. Please follow the guidelines
below to properly maintain your spa.
MAINTENANCE SCHEDULE
DAILY
¥ Check the water level and refill the spa to the level
shown on page 8, step 1.
¥ Check the pH balance and sanitizer level. Adjust if
necessary (see WATER CHEMISTRY on this page).
WEEKLY
¥ Clean the spa shell at the waterline.
¥ Check and thoroughly clean the filter (see CHECK-
ING AND CLEANING THE FILTER on this page).
¥ Replace the filter if needed (see ORDERING
REPLACEMENT PARTS on the back cover).
MONTHLY
¥ Clean the spa cover (see MAINTAINING THE SPA
COVER below).
¥ Soak the filter for two hours in a trisodium phos-
phate (TSP) solution. Rinse the filter in clean water.
¥ Replace the filter if needed (see ORDERING
REPLACEMENT PARTS on the back cover).
EVERY THREE MONTHS
¥ Drain the spa and refill with clean water. Sanitize
and test the pH of the water.
¥ Check for any leaks around the pump or joints in
the pipes. The seals will wear out over time; detect-
ing leaks early can reduce repair costs.
¥ Clean the interior of the spa. Do not use solvents or
waxes.
EVERY SIX MONTHS
¥ Treat the exterior with a wood sealant (see MAIN-
TAINING THE SPA EXTERIOR below).
MAINTAINING THE SPA COVER
The spa cover should be cleaned monthly. To clean
the spa cover, hang it over a clothes line and spray it
with a hose. Allow the cover to dry thoroughly.
CLEANING THE SPA SHELL
The spa shell should be cleaned with a mild soap
solution. Do not use solvents. The spa should always
be clean and dry before being moved or stored.
MAINTAINING THE SPA EXTERIOR
The wood panel exterior has been treated with a
sealant at the factory to protect the wood from water
damage. We suggest that you treat the wood finish
twice a year with an additional coat of weather
sealant. Contact you local spa and pool supplier for
advice on which sealants work best in your climate.
CHECKING AND CLEANING THE FILTER
The filter should be checked periodically for build-up
of dirt and oil. If the filter needs to be cleaned, follow
the steps below:
1. Turn off the power.
2. Remove the two screws from the filter cover. Be
careful not to strip the threads from the holes.
Remove the Filter Cover.
3. Remove the filter
from the spa jet
unit by lifting the
filter from the fil-
ter housing.
4. Check the filter
for any dirt or
debris. If the filter
needs to be
cleaned, rinse the
filter with a hose.
If the filter still is
dirty, you will
need to soak it in
a cleaning solu-
tion which can be
obtained from a
pool and spa
supply store.
5. Inspect the filter
for damage.
Replace the filter if there are any signs of dam-
age.
6. Re-insert the cleaned filter into the filter housing.
7. Re-attach the filter cover with the screws. Do not
overtighten the screws.
SANITIZING THE RESTORATION 2.0
Please refer to your local pool and spa supplier for
information concerning which chemicals you should
use in your area to sanitize the spa.
The most common sanitizing agent is a solid bromine
concentrate. The amount required varies according to
several factors, such as user load, temperature, water
conditions, and so forth.
Proper water maintenance is a fairly complex process.
We recommend that you contact your local pool and
spa supplier for information on how you should best
accomplish this.
MAINTENANCE
Screws
Filter
Cover
Filter
Housing
Filter
Find Your Products By Category
Please Login
