ProForm Hot Tub PFSG51030 User Manual

3.9

Out of 2 Ratings

Owner's of the ProForm Hot Tub PFSG51030 gave it a score of 3.9 out of 5. Here's how the scores stacked up:

  • Reliability

    4.0 out of 5

  • Durability

    4.0 out of 5

  • Maintenance

    3.5 out of 5

  • Performance

    4.0 out of 5

  • Ease of Use

    4.0 out of 5
of 20
 
9
4. Place the Spa Cover (18) over the spa. Make sure
that the Spa Cover is properly centered.
Snap a Buckle (2) onto each of the four latches on
the Spa Cover (18).
See the inset drawing. Position one of the Buckles
(2) on one of the Long Panels (38), and hold the
Buckle in place so that the strap on the Spa Cover
(18) is tight. (Note: It may be easier to position the
Buckles if a second person holds the strap on the
opposite side of the Spa Cover tight.) The Spa
Cover must be tight. Do not place the Buckle
over one of the grooves in the wood panels.
Remove the latch from the Buckle. Attach the Buckle
to the side of the spa with two Buckle Screws (1).
Note: It may be helpful to use a drill with a 1/16”
bit to make starter holes in the wood panels. You
may also want to apply a little soap or wax to the
screw threads.
Attach the other three Buckles (2) to the remaining
panels in the same manner.
To secure the Spa Cover (18), snap the latches on
the Spa Cover into the Buckles (2) on the panels. To
lock each Buckle, insert the key and turn it clockwise
1/4 turn. To unlock each Buckle, insert the key and
turn it counterclockwise 1/4 turn. Always keep the
Buckles locked when the spa is not in use. Keep
the keys in a safe place, out of the reach of chil-
dren.
3. Wipe out the spa shell using a damp cloth.
Remove the two warning decals (not shown) from
the spa shell. Before you fill the spa, make sure
that it is in the position you want and that it can be
easily serviced if needed. Once the spa is filled
with water, it must be drained to be moved.
See the inset drawing. Locate the Filter Door (24).
Grasp the indicated handle and open the Filter
Door in the direction shown. Insert a garden hose
or other clean water source into the opening and
fill the spa. Do not use soft water. The spa may
be filled with cold water; however, if warm or hot
water is used, the spa will be ready for use soon-
er. Fill the spa to the indicated location. Do not
overfill the spa.
Fill to Here
3
4
18
38
2
2
1
Strap
Latch
Latch
Strap
Key
2
24
Handle
Hose

   Find Your Products By Category