iHome Clock Radio iH36 User Manual

3.9

Out of 13 Ratings

Owner's of the iHome Clock Radio iH36 gave it a score of 3.9 out of 5. Here's how the scores stacked up:

  • Reliability

    4.08 out of 5

  • Durability

    4.08 out of 5

  • Maintenance

    4.08 out of 5

  • Performance

    4.17 out of 5

  • Ease of Use

    3.31 out of 5
of 21
 
Operating the Cooking Timer
The cooking timer can be set at one minute intervals between 1-120 minutes.
1. Press the ᕢ Timer Button once to activate the cooking timer.
2. You will see "60" on the display (meaning the cooking timer will sound after 60 minutes). To adjust the timer, press and
hold the ᕢ Timer Button until the display flashes. Then press the ᕦ Select Up/FF or ᕥ Select Down/Rew Button
until the time you want is displayed.
3. In a few seconds the display will change back to show the real time and the Timer Icon will show on the left side of the
display to indicate the cooking timer is on.
4. Press the ᕢ Timer Button once to view the time remaining, or press twice to turn off/cancel the timer.
5. When the time is up, a buzzer will sound. It will continue for 1 minute. Press any button to stop it immediately.
Trouble Shooting
16
Symptom Possible Problem Solution
Unit doesn’t
respond
(no power)
Plug the AC cord into a wall
outlet
Wall outlet is not functioning
Plug another device into the same outlet to confirm the outlet is
working properly
iPod does not
dock properly
Make sure the dock insert is the proper fit for your iPod (see
chart on page 10)
Battery Low
icon always on
Batteries are weak Replace with new batteries
AC cord isn’t plugged into a
wall outlet
Not using an iPod insert, or
using the wrong one
iPod not installed properly Remove your iPod from the dock and check for obstruction on
the connectors in the dock and on your iPod. Then reseat it in
the dock.
Batteries were not installed
properly
Check to make sure the + and – ends match the diagram
iPod does not
respond to the
unit
iPod is not installed properly Remove your iPod from the dock and check for obstruction on
the connectors in the dock and on your iPod. Then reseat it in
the dock.
Your iPod software is too old
iPod is locked up
Please make sure your iPod is working properly before docking
into the unit. Please refer to your iPod manual for detail.
Upgrade software on your iPod. For details, visit
http://www.apple.com/ipod/download

   Find Your Products By Category