0

Out of 0 Ratings

Owner's of the Garmin Two-Way Radio RINO gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 132
 
Rino
®
520/530 Owner’s Manual 77
for downloading are available from the Garmin Web site
(www.garmin.com).
Choose one of the GPS options other than Normal to
significantly save battery power. The Battery Saver mode
reduces the rate of satellite signal position updating
and the GPS Off option stops satellite signal reception
altogether. The Demo Mode simulates navigation.
Enable or disable WAAS.
Set the Battery Type for more accurate battery capacity
status when using the optional battery pack for alkaline or
NiMH “AA” batteries.
Set the unit to turn Off if external power is lost.
Set the unit to power On when the charger is connected or
to charge the unit only.
Radio Setup Page
This setup page allows you to adjust the radio operation
to meet your requirements. (See page 14 for detailed
instructions.)
Display Setup Page
You can choose a display mode, a
color scheme for day and for night
viewing, adjust the amount of time
that the backlighting feature stays
on, and set the level of brightness.
To access the Display
Setup page:
1. Press the Main Page button to access the Main Menu.
2. In the Main Menu, scroll down and select Setup
and then Display.
Display Mode—Can be set for Auto (changes from day
to night mode and back again at dusk and dawn), Day
only, or Night only.
Color Scheme Selection—Can be set in Day and Night
modes to one of 10 color schemes. As you scroll up and
down the list of schemes, each color scheme previews.
Backlighting Timeout—Choose from Stays On or
delays of 15 seconds, 30 seconds, one minute, or two
minutes before timing out.
Rino
®
520/530 Owner’s Manual 77
UNIT OPERATION > SETUP PAGES
Display Setup Page