Garmin Projector 720C User Manual

0

Out of 0 Ratings

Owner's of the Garmin Projector 720C gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 106
 
Maintaining and Transporting the Projector 51
5
Maintaining and
Transporting the Projector
Your projector needs little maintenance. All you need to do on a
regular basis is keep the lens clean. Any dirt or smears on the lens may
show up on your projected image.
You also need to periodically clean the air filter on the side of the
projector. A clogged air filter can block ventilation needed to cool the
projector and cause overheating.
The only parts you should replace are the lamp and air filter. If any
other part needs replacing, contact your dealer or a qualified servicer.
This chapter covers the following:
■ Cleaning the lens
■ Cleaning the projector case
■ Cleaning and replacing the air filter
■ Replacing the lamp
■ Resetting the lamp timer
■ Transporting the projector
warning
Before you clean any part
of the projector, turn it
off and unplug the power
cord. Never open any
cover on the projector,
except the lamp and filter
covers. Dangerous
electrical voltages in the
projector can injure you
severely. Do not try to
service this product
yourself, except as
specifically explained in
this User’s Guide. Refer
all other servicing to
qualified service
personnel.
720-730.book Page 51 Thursday, October 30, 2003 11:32 AM

   Find Your Products By Category