Garmin Network Card RINO User Manual

0

Out of 0 Ratings

Owner's of the Garmin Network Card RINO gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 110
 
16 Rino
®
110 Owner’s Manual
UNIT OPERATION > RADIO PAGE
Setup Scanlist
Refer to “Scanning and Monitoring” previously in this
manual for complete information about this feature and
the options in this page.
Turn Radio/GPS On/Off
Press the Thumb Stick In on either of these two options
to toggle them from on to off. For example, to turn GPS
Off, press the Thumb Stick In when Turn GPS Off is
highlighted.
Informational Picture
The Informational Picture on the bottom half of the
Radio Page features Garmin’s Mr. Mark Waypoint figure
showing current GPS and radio status, and radio actions.
As you operate the unit, the graphics change depending
on what actions you are taking and the unit settings.
GPS Status
Four satellites are shown on at the top of the picture along
with descriptive text to indicate GPS reception status.
As the unit collects satellite information, the satellite
symbols flash alternately until all four are steady to
indicate a 3D position fix. The more satellites that are
steady, the better your position fix.
Radio Transmission Status
As radio signals come in, signal wave symbols
( ) display to the left of Mark Waypoint. Fragmented
(or broken) signal symbols ( ) are shown to indicate
activity on that channel. Audio remains muted because
the incoming signal does not match the squelch code your
unit is set to.
Informational Picture showing
Mark Waypoint

   Find Your Products By Category