0

Out of 0 Ratings

Owner's of the Garmin Network Card RINO gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 110
 
Rino
®
110 Owner’s Manual 7
UNIT OPERATION > RADIO PAGE
UNIT OPERATION
Radio Page
The Radio Page is the first of the default Main Pages.
This page provides the user interface for FRS (Family
Radio Service) and GMRS (General Mobile Radio
Service) radio operations. Garmin Rino units work
with 3rd party FRS/GMRS radios, provided the other
radios use standard FRS/GMRS frequencies. To take full
advantage of the Rino features, communicate with other
Rino users.
Also use the Radio Page to control and setup the radio,
view current settings, and see informational graphics of
the unit’s operation.
Initializing the Rino 110
To take full advantage of all of the Rino 110 features,
the GPS receiver must be initialized. The initialization
process allows the Rino 110 to receive and store satellite
information and begin using the satellites for navigation.
Initialization is automatic and should only take a few
minutes.
To
initialize the unit (acquire satellites):
1. Take the Rino 110 outside where it has an
unobstructed view of the sky and turn it on.
2. The unit begins to search for satellite signals.
“Tracking Satellites” is displayed while the unit is
initializing.
3. Initialization should take no more than five
minutes. When the GPS is initialized and ready
for navigation, the message “3D Accuracy” is
displayed on the Radio Page.
Radio Page