0
Owner's of the Garmin GPS Receiver SL60 gave it a score of 0 out of 5. Here's how the scores stacked up:
WPT (Waypoint) - SL50
The Waypoint key allows access to the waypoint
database. (SL60 accesses the database from within
the System function - see page 39.)
NAV (Navigation)
Press the NAV key to reach the navigation
functions.
SYS (System Mode)
Press the SYS key to reach the System mode
functions. System mode is used to make system
level adjustments, setup flight plans, access the
database, and modify Nav function displays.
MSG (Message)
Press the MSGkey to reach the Message functions.
The MSG annunciator will flash when a new
message is provided. In the SL60, pressing MSG
twice will start the Nearest Waypoint mode just as
pressing NRST will on the SL50.
DIRECT-TO
The DIRECT-TO key is used to define a direct
course from your present position to a waypoint.
INFO (Information)
The Info function accesses supplementary
information about a waypoint.
SEL (Select)
The SELECTkey activates editing or the selection
of options. Editing is active on the items that flash
on the display.
In the SL60 when the COM function is active,
pressing the SEL key will recall stored frequencies.
ENT (Enter)
The ENT key enters and saves the information
flashing on the display. If the ENT key is not
pressed after editing, any changes made are not
saved.
In the SL60 when the COM function is active,
pressing the ENT key will save the standby
frequency into the Auto Stack list.
5
Introduction
SEL
ENT
INFO
D
NAV
SYS
MSG
WPT
Find Your Products By Category
Please Login
