0

Out of 0 Ratings

Owner's of the Garmin GPS Receiver GPSMAP gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 82
 
26 GPSMAP 400/500 Series Owner’s Manual
Where To?
To delete a waypoint or an MOB:
1. From the Navigation chart, use the map pointer ( ) to highlight
the waypoint or the MOB on the Navigation chart.
OR
From the Home screen, select Information > User Data >
Waypoints.
2. Select the waypoint or the MOB you want to delete.
3. Select Review > Delete (The Review button is only shown when
more than one waypoint is in the vicinity.)
Creating and Using Routes
You can create and store up to 20 routes (100 routes for models
GPSMAP 431/441/531/541/536/546, including “s” models), with up
to 250 waypoints each.
To create a route from your present location:
1. From the Navigation chart, use the map pointer ( ) to select
your destination.
2. Select Navigate To > Route To.
3. Use the map pointer ( ) to select the location at which you
want to make the last turn toward your destination.
4. Press Select. Repeat this step to add additional turns.
5. Press Menu to cancel, to undo the last turn, or to begin
navigating the route.
To create a route in another location:
1. From the Home screen, select Information > User Data >
Routes > New Route.
2. Select Use Chart or Use Waypoint List.
3. If you select Use Chart, use the map pointer ( ) to select the
initial location at which you want to start the new route. If you
select Use Waypoint List, select the rst waypoint on the route.
4. Choose the location of the rst turn and press Select. Repeat
until the route is complete.