0

Out of 0 Ratings

Owner's of the PYLE Audio Stereo Equalizer PYLE Plus Series gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 14
 
5
1. 3.5mm DVD input jack
2. DVD & AUX input switch
3. fader control
4. volume control
5. subwoofer output volume
6. subwoofer frequency control
7-10. 4 band parametric equalizer controls
11-12. DVD and AUX inputs
13-15. subwoofer/rear/front
channel outputs
16-17. DVD/AUX input gain adjustments
power connections
Connects to the DVD source with 3.5mm plug cable.
to select the AUX or DVD inputs.
• in a 2 Amplifier, 4 Speaker system, rotating the knob
to the FRONT side increases the level of the front speakers;
rotating to the REAR side increase level of the rear
speakers. At mid position, both sets of speakers are at
maximum level.
• in a 2 Speaker system, the fader control should be
rotated to the position which provides highest levels for
both sets of speakers.
allows adjustment of sound level for particular program
material or source.
this control adjusts output level of subwoofer RCA jack.
lets you adjust the subwoofer crossover frequency point
from 30-250 Hz.
this four-band equalizer gives you to control over the
output levels at various frequency.
RCA cables are used to connect your car stereo head
unit, DVD player, or other source to either the line or
AUX inputs.
RCA cables are used to connect the subwoofer channel
outputs to the subwoofer channel amplifier inputs, the
rear channel outputs to the rear channel amplifier inputs,
and the front channel outputs to the front channel
amplifier inputs.
allows you to adjust the left and right channel input
sensitivity to match the output level from your DVD or
auxiliary source.
connect to power source as follows:
+12V: Connect a red wire of at least 12 gauge to the
car battery or other power source.
GROUND: Connect a black wire of at least 12 gauge
to car chassis for ground connection
REMOTE: Connect an orange wire to remote activating
(12V DC) wire of car stereo or other head unit.
features
owner’s manual