0
Owner's of the PYLE Audio Home Theater Server View Series gave it a score of 0 out of 5. Here's how the scores stacked up:
OPERATING WHEN THE MONITOR
STRETCHING OUT
When the monitor stretches out, the
front panel of the unit is in state B (see
Fig.B), you can operate the unit by
using the current menu displayed on the
6.5 inch color TFT display (5).
And if the unit is connected to other TV
unit through the cable with the 13-pin
din plug on each terminal, there have
radio mode, TV mode and CDC mode
to be selected. When the unit isn't
connected to other TV unit through the
cable, there have radio mode, AV mode
and CDC mode to be selected.
The other operations are the same with
the operation when the front panel in
state A and those will not be described
below,you can refer to the above details.
Menu Control operation in radio mode
Press MODE button (12) on front panel or
MODE button (42) on remote control to
select radio mode. The following
information will appear on the display (5).
14
OPERATION
FM1 87.5 MHz
STEREO DX
VOLUME 36 M1 87.50
BASS 0 M2 90.10
TREBLE 0 M3 98.10
BALANCE L-R M4 106.10
FADER F-R M5 108.00
LOUD OFF M6 87.50
EQ FLAT
Press MENU button (19) or (45), the
VOLUME will be selected, then press
TUN/CH / buttons (46) to select the
item upward or downward. Then press
VOL / buttons (47) to adjust the
selected item. The corresponding value
will show on the display.
Press any one of the Radio Preset
buttons (1~6) (37) to retrieve a station
between M1~M6. The corresponding
number will show on the display.
Press LOC button (38) on remote
contro lto select between "LOC" and
"DX".
Press MO/ST button (16) on the front
panel or ST/MO button (53) on remote
control to select "MONO" or "STEREO".
FM1 98.10 MHz
MONO LOC
VOLUME 30 M1 87.50
BASS 2 M2 90.10
TREBLE 2 M3 98.10
BALANCE L-R M4 106.10
FADER F-R M5 108.00
LOUD ON M6 87.50
EQ POP
When press DSP button (20) on the
front panel or DISP button (44) on
remote control, the current time appears
on the screen display (5) and LCD (4).
And the clock on the screen display (5)
will not disappear if you don't operate
it after several seconds, but the clock on
the LCD will disappear. Press DSP button
(20) or DISP button (44) again, the clock
on the screen display (5) will disappear.
Then press the button once again, the
clock will appear again.
FM1 87.5 MHz
STEREO DX
VOLUME 36 M1 87.50
BASS 0 M2 90.10
TREBLE 0 M3 98.10
BALANCE L-R M4 106.10
FADER F-R M5 108.00
LOUD OFF M6 87.50
EQ FLAT
10:12:22
When the clock appears on the screen
display, hold DSP button (20) or DISP
button (44) to select 10 for hours:
FM1 87.5 MHz
STEREO DX
VOLUME 36 M1 87.50
BASS 0 M2 90.10
TREBLE 0 M3 98.10
BALANCE L-R M4 106.10
FADER F-R M5 108.00
LOUD OFF M6 87.50
EQ FLAT
10:12:22
Find Your Products By Category
Please Login
