3.5
Owner's of the ProForm Exercise Bike 831.21941.2 gave it a score of 3.5 out of 5. Here's how the scores stacked up:
12. While a second person holds the Console (6)
near the Console Plate (19), connect the wires
on the Console to the Main Wire (31) and to the
Pulse Wire (52).
Insert the excess wire into the Console Plate
(19) or into the Console (6).
Tip: Avoid pinching the wires. Attach the
Console (6) to the Console Plate (19) with four
M4 x 16mm Screws (40).
12
6
19
13. Attach the Water Bottle Holder (49) to the
Upright (3) with two M4 x 22mm Screws (54).
13
49
14. Identify the Right Pedal (26), which is marked
with an "R." Using an adjustable wrench, firmly
tighten the Right Pedal clockwise into the right
arm of the Crank (13).
Tighten the Left Pedal (not shown) counter=
clockwise into the left arm of the Crank (not
shown).
Adjust the strap on the Right Pedal (26) to the
desired position, and press the end of the strap
onto the tab on the Right Pedal. Adjust the
strap on the Left Pedal (not shown) in the
same way.
14
26
15. Make sure that all parts of the exercise bike are properly tightened. Note: Some hardware may be left
over after assembly is completed. To protect the floor or carpet from damage, place a mat under the exercise
bike.
11
Find Your Products By Category
Please Login
