Garmin Universal Remote nüvi User Manual

0

Out of 0 Ratings

Owner's of the Garmin Universal Remote nüvi gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 2
 
Introduction
The 4000/5000 Series RF Remote is for use with the following Garmin chartplotters:
GPSMAP 4008 GPSMAP 5008
GPSMAP 4012 GPSMAP 5012
GPSMAP 4208 GPSMAP 5208
GPSMAP 4212 GPSMAP 5212
The remote is used to control the 4000/5000 screens. It can be used up to 10 meters (32 feet) from the
chartplotter and does not need to be pointed directly at your chartplotter.
The remote operates on two AAA batteries (not included). To replace the batteries, use a small Phillips
screwdriver to open the access cover on the rear panel. Use alkaline batteries for best results.
Ensure your chartplotter has the current software, available at www.garmin.com.
Description of Buttons
Pairing buttons—press and hold to pair a
remote with a chartplotter. Press and release to
select a paired chartplotter.
Rocker—press up, down, left, and right to move
the map pointer and enter data.
SELECT—press to confirm messages and select
items.
MENU—press to view additional options on
most screens.
LOCK—press to lock all remote functions.
Press again to unlock. The remote beeps when it
is locked and a button is pressed.
MOB (Man Overboard)—press to mark your
current location as a Man Overboard point.
HOME—press at any time to return to the
Home screen.
MARK—press to mark your current location as
a waypoint.
Up/Down—press to highlight menu items.
Range (+/-)— press up (+) and down (-) to increase and decrease the map zoom scale.
•
•
•
•
Getting Started
Use one of the three pairing buttons to pair your remote with a specific chartplotter. If you have more than
one chartplotter, this allows you to separately control up to three chartplotters.
To allow wireless connections on your chartplotter:
1. From the Home screen, select Congure > Communications > Wireless Devices.
2. Set Allow New Connections to Yes.
To pair the remote with a chartplotter:
1. Press and hold one of the Pairing Buttons until “New Wireless Remote Found” appears on the
chartplotter.
2. Select Connect on your chartplotter.
To select a chartplotter, press and release the Pairing Button that is paired with the chartplotter you want to
control.
Specications
Size: 135 mm H x 50 mm W x 25.7 mm D (5.3" x 2" x 1")
Weight: 77 g (2.7 oz), without battery
101 g (3.6 oz), with batteries
Case: waterproof to IEC 529-IPX-7
Frequency:
2.46 GHz
Max Range: 10 m (32 ft); this value may vary slightly,
depending on the installation of the chartplotter
Battery Life: 100 days when used 15 minutes per day
3 years shelf life
Operating Temperature Range: -15°C to 70°C
(5°F to 158°F)
Storage Temperature Range: -40°C to 85°C
(-40°F to 185°F)
•
•
•
•
•
•
•
•
Pairing
buttons
Range (+/-)
Rocker
Up/Down
MARK
HOME
MOB
(Man OverBoard)
SELECT
MENU
LOCK

   Find Your Products By Category