Garmin Marine GPS System GPSMAP User Manual

0

Out of 0 Ratings

Owner's of the Garmin Marine GPS System GPSMAP gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 152
 
Using xImage for Customized Waypoint Icons
Use xImage to exchange images between your computer and your
GPSMAP 378/478. You can download and save screenshots of any
screen shown on your unit. xImage also allows you to download
customizable splash screens and waypoint symbols from compatible
GPS units, customize them (if you have an image editing program
on your computer), and send them back to your GPS unit.
You can download xImage from the Garmin Web site at
www.garmin.com/ximage/. See the Help le for complete
instructions about using xImage.
Installing and Removing Data Cards
The GPSMAP 378/478 uses an optional Garmin data card to show
digital charts and maps. Install the data card in the card slot located
on the bottom of the unit. Install or remove the data card at any time,
whether the unit is on or off.
You can load a variety of information on your data card, such as
MapSource detailed maps. You can also buy preprogrammed cards
to use with your GPSMAP 378/478.
Data cards are not waterproof, should not be exposed to moisture or
excessive static charges, and should be stored in the case supplied
with the card.
To install a data card:
1. Insert the card into the slot on the bottom of the unit. Be sure
the label is facing the front of the unit.
2. Firmly push the card into the unit. It is not necessary to force
the card. The handle is still exposed when it is properly
inserted.
3. If the unit is on, a conrmation tone sounds. The rst time
you insert a programmed data card, the unit takes a few
seconds to read the card. Once the data card has been
properly installed and accepted, a summary screen noting
the card details appears. Press ENTER to acknowledge.
If you insert a data card and get a card format not recognized
message, try removing the card and reinserting it. If the card is still
not recognized, contact Garmin or your Garmin dealer.
To remove a data card:
1. Grasp the card handle. The handle expands for easy
removal.
2. Pull the card out of the card slot on the bottom of the unit.
3. If the unit is on, a conrmation tone sounds when the data
card has been removed.
120 GPSMAP 378/478 Owner’s Manual
APPendIX > InstAllAtIon InforMAtIon

   Find Your Products By Category