Garmin Fish Finder GHS 10 User Manual

0

Out of 0 Ratings

Owner's of the Garmin Fish Finder GHS 10 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 12
 
GHS 10/10i Installation Instructions EN-1
These installation instructions are for
the GHS 10 and GHS 10i handsets.
The GHS 10 is for use with the Garmin
VHF 200 radio and the GHS 10i is for
use with the Garmin VHF 200i radio.
For additional information, refer to the
VHF 100/200 Series Radio Installation
Instructions that came with your radio.
For operational instructions, refer to
your VHF 100/200 Series Radio Owner’s
Manual.
The handset comes with a 32.8 ft. (10 m)
extension cable, a bulkhead mounting
plate, a weather cap, and the necessary
cable hardware.
Install the GHS 10 or GHS 10i
handset at least 20 in. (500
mm) from any compass.
To connect the GHS 10 or GHS 10i
handset:
1. Using the mounting plate as a
template, use a center punch to mark
the three screw locations on the
surface.
2. Use a pencil to trace the cable hole in
the center of the mounting plate. Set
the mounting plate aside.
3. Use a ⅞ in. (22 mm) hole saw to cut
the cable-mounting hole.
4. Use a ⅛ in. (3 mm) drill to drill the
three mounting-plate holes.
GHS 10/10i Installation Instructions
Mounting
plate
Weather cap
Cable nut
Cable-mounting
hole
External speaker
wires

   Find Your Products By Category