0

Out of 0 Ratings

Owner's of the Garmin All in One Printer WORKFORCE gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 56
 
Wireless Network Setup 27
Wireless Network Setup
This section supplements the on-screen instructions for setting up your
WorkForce 323/325 Series on a wireless network. WorkForce 320 Series owners
may skip this section, as the WorkForce 320 has no built-in wireless network
functionality.
Before you begin, make sure you set up your product as described on the
Start Here sheet. Follow the instructions in this chapter only if you need additional
help.
You will need to install the software on every computer that will print to your
product. Temporary use of a USB cable (not included) is recommended for the
first installation only. After the printer is connected to the network, you will be
prompted to remove the USB cable.
If you are using Mac OS X 10.6 or don’t have a USB cable, you need to use the
buttons on the printer to select wireless settings.
Note:
If you have trouble setting up your product, see “Network Problems (WorkForce 323/
325 Series)” on page 42.
If this is the first time that you’re installing the product, see “Installing for the
First Time” on page 28.
If your product is already on your wireless network and you need to set up
additional computers to print to the product, see “Setting Up Additional
Computers” on page 37.